+86 29 8177 9287 (English)
+86 29 8177 9276 (Espa?ol)
+86 29 8177 9280 (Русский)
LED learning center
  • How to Know the Quality of LED Display
  • 15-10-2013


Now more and more people realize that LED displays are useful in marketing their business. Coz for example the traditional banner can only display the static images, which cannot the meet the requirement of showing more flexible and fabulous advertisements in video or audio way, people need to change the banner very frequently for different use that will cost a lot of time; the many used and discarded materials are not good for the environmental protection. In addition, the printed color on banner is faded very easily especially after rainy or sunshiny days, and there must be lamplights around to make the banner to be visible to people at night…

Due to so many disadvantages of the traditional advertising way, people turn to find LED Display to improve their business effect. But how to c
hoose a high quality LED display is also an important issue for most buyers.

1. LED display flatness: LED display of the surface flatness to within 1mm, to ensure the display image is not distorted, partial results raised or recessed LED display's viewing angle appears dead. The quality of roughness determined mainly by the production process.

2.LED display's brightness and viewing angle: indoor full color LED display's brightness to 800cd/m2 above, outdoor LED display's brightness to 1500cd/m2 above, in order to ensure the normal operation of LED displays, or because of the brightness is too low and can not see the displayed image. The size of the brightness from the LED display the die is good or bad decision.

Viewing angle directly depends on the size of the audience how many LED displays, therefore the bigger the better. The size of viewing angle of the packages from the die to decide.

3.LED display white balance effect: white balance effect is one of the most important indicators display. Three primary colors red, green and blue color science taken the ratio of the time the show will 1:4.6:0.16 pure white, if the actual proportion of the white balance a little deviation deviation occurs, the general should pay attention to whether there is bluish white, partial yellow-green phenomenon. The quality of the white balance control system mainly by the display determined the reduction of color die is also affected.

4.LED displays color reduction: LED display color reduction is LED displays of color reduction, which is displayed in color LED display and playback source to maintain a high degree of color consistency, so as to ensure realistic images.

5.LED displays whether the Mosaic: Mosaic is the phenomenon of dead appear on the screen Always or often a small four black boxes, both modules necrosis, the main reason for the LED display connectors used in the quality, but off.

LED display dead is Always or often appear on a single point of black, mainly by the number of dead die is good or bad to decide.

6.LED displays without color: color is more obvious between the adjacent modules of the color, the color of the transition to the module as a unit, the phenomenon is caused by color LED display control system by the poor, gray grade is not high, due to lower frequency scan.

By Electronics


  • Home|Gallery|Solutions|Products|News|Support|About us |Contact us
  • ICP:05001950  website security
神秘梦境APP下载 广东麻将比赛视频全集 福建快三网上投注 澳洲幸运5冷热图 闲来贵州麻将1.0.9 1分钟一次的极速赛车骗局 河南四方麻将下载苹果 江苏七位数历史开奖 斯诺克比分在哪看 新疆11选5开奖号码走势图 股票配资平台正规 31选7开奖结果走势图百度 手机二人麻将好友同玩 云南快乐十分走势图50 3d过滤器手机免费版 下载哈尔滨普通麻将 福建十一选五走势图手机版